
EMS-6000
Small, fast, reliable galvanometer scanner system for 4.5mm and 5.5mm apertures
The EMS-6000 galvanometer scanner system is very capable performer
The EMS-6000, also called ''Blue'', is designed for space and cost sensitive applications. The driver is analog, dual axis (drives both scanners) and is slightly smaller than a credit card.
The motors have inherited the design of the legendary EMS-4000 scanners, meaning that is almost impossible to damage them, even if you grab the mirror with your fingers during scanning.
The scanner mount looks simple, but packs an unbelievable number of different configurations. You can place the X scanner down or up, receive the beam from left or right and choose if you want the 15deg setback between X and Y in all of the above setups.
Literally, the mount can be configured in every possible way, no exceptions.
The back side of the motor has a centrally placed low profile connector for connection to the driver, so the scanner can rotate freely at 360deg, necessary for the different setups.
The position sensor amplifier is built into the scanner, there is no need for cumbersome dual shielded scanner-to-driver cables. We use a very flexible flat cable which can be bent and routed very easily inside your system.
Custom scanner cable lengths are welcome, at the time of ordering.
We offer 2 different mirror sizes, for 4.5mm and for 5.5mm apertures. The mirrors are rectangle, without
chamfering, to accommodate square shaped (diode matrix) beams.
We stock whitelight dielectric (400-70nm), YAG dielectric 1064nm and protected gold CO2 mirror material.
Specifications
Power requirements......................+/-24V DC, 2A per rail
Control voltage.................................+/-5V differential, +/-10V single ended
Scan field...........................................54 degrees optical
Linearity.............................................99.9% over 40deg optical
Position out feedback.....................+/-10V
Small step response, 4.5mm.......250μsec (38K ILDA speed)
Small step response, 5.5mm.......280μsec (33K ILDA speed)
Coil resistance..................................0.87 Ohms